Compressors & Air Tools

04-06-20 · Profissional

• 220 VVoltage
• 320 l/minPerformance
• 8 barWorking pressure

A 24 l compressor for workshops, service centers and small production: spray painting and pneumatic tools. The motor shroud cuts noise and the wheels make it easy to reposition.

04-06-21 · Profissional

• 220 VVoltage
• 320 l/minPerformance
• 8 barWorking pressure

A 50 l compressor for spray painting and pneumatic tools. The receiver volume cuts short motor starts and extends the life of both the motor and the connected tool.

04-06-22 · Profissional

• 220 VVoltage
• 410 l/minPerformance
• 10 barWorking pressure

A 50 l compressor with two outlets, so two pneumatic tools can run at once. The cast iron cylinder and copper motor winding are built for regular workshop duty.

04-06-23 · Profissional

• 220 VVoltage
• 410 l/minPerformance
• 10 barWorking pressure

A 100 l compressor for a garage, workshop or small production floor. The large receiver holds pressure steady and the wheels let one person reposition the unit.

04-06-30 · Profissional

• 220 VVoltage
• 450 l/minPerformance
• 8 barWorking pressure

A belt-driven 50 l compressor with two outlets for running two pneumatic tools at once. The belt drive is built for long duty cycles on a 220 V supply.

04-06-31 · Profissional

• 220 VVoltage
• 510 l/minPerformance
• 10 barWorking pressure

A belt-driven 100 l compressor for high volumes of compressed air. It runs from a 220 V supply, takes up to two pneumatic tools and holds up to long uninterrupted sessions.

04-06-32 · Profissional

• 23.7 kgNet weight
• 220 VVoltage
• 220 l/minPerformance

An oil-free 24 l compressor that needs no preparation before starting. It runs a spray gun or inflates tires in a garage or workshop.

04-06-33 · Profissional

• 33.8 kgNet weight
• 220 VVoltage
• 325 l/minPerformance

An oil-free 50 l compressor that is ready to work straight away. It supplies a spray gun or pneumatic tools in a garage, workshop or small production area.

20-04-06-1003 · Profissional

• 1/2Thread
• 0.116 kgNet weight
• 70x70x75 mmDimensions (unpackaged)

An air filter with a 1/2 mounting thread for the CX-50L and CX-24L compressors, protecting the pump from dust.

20-04-06-1038 · Profissional

• 0.6 kgNet weight
• 70x70x75 mmDimensions (unpackaged)

An air filter with an M16x1.5 mounting thread for the INFORCE CXV-100L, CXV-50L, OCX-50 and OCX-24 compressors, protecting the pump from dust.

21-02-18-1001 · Profissional

• 1/2Thread
• 0.145 kgNet weight
• 125x125x80 mmDimensions (unpackaged)

An air filter for the INFORCE BCX-50L and BCX-100 compressors, protecting the pump from dust.

BCX-200L · Profissional

• 220 VVoltage
• 412 l/minPerformance
• 10 barWorking pressure

A belt-driven compressor with a 200-liter receiver for running pneumatic tools in a vehicle workshop. The horizontal layout keeps it stable, and wheels and a handle make it easy to move.

BCX-200L-3P · Profissional

• 380 VVoltage
• 580 l/minPerformance
• 10 barWorking pressure

A belt-driven compressor with a 200-liter receiver for painting, tire inflation and blow-down work. The large receiver cuts cycling, and a support with non-slip tips keeps the unit steady.

IBCH-200L-3P/690 · Profissional

• 380 VVoltage
• 690 l/minPerformance
• 10 barWorking pressure

A belt-driven compressor with a 4 kW motor and a 200-liter receiver, running on a three-phase 380 V supply. Low noise lets it stand next to the work area; wheels make it easy to move.

IBCV-100L-3P/420 · Profissional

• 380 VVoltage
• 420 l/minPerformance
• 10 barWorking pressure

A belt-driven compressor with a three-phase 380 V supply for vehicle repair and construction: tire inflation, spray painting, filter cleaning and other pneumatic work.

IBCV-500L-3P2/1400 · Profissional

• 380 VVoltage
• 1400 l/minPerformance
• 12 barWorking pressure

A belt-driven compressor with a 500-liter receiver for equipment that runs on compressed air. It tolerates overloads and high ambient temperatures and has a long service life.