Plasma cutting inverter CUT-40 04-08-05

The INFORCE CUT-40 plasma cutting inverter is intended for professional use.

The modern IGBT platform copes with higher voltage thanks to the extra headroom it provides. The post-flow time of the plasma torch after the cut can be set, which protects the torch from premature wear and saves on consumables. The machine suits any conductive material: all types of steel, copper and its alloys, and aluminum. Severance cutting thickness in steel is up to 15 mm. The machine requires a compressor delivering 170 l/min of air at a pressure of 4-5 bar. The torch cathodes have two working positions: if a cathode is worn on one side, it can be turned around and cutting continued. The front panel carries the knobs for cutting current and post-flow time after a session, together with indicators for power, overheating and fault. The lower part of the machine holds the torch socket and the return cable socket, with the torch control connector between them.

• CUT-40 plasma cutter
• Power cable 2.2 m / 3x2.5 mm2
• Ground clamp with cable 200 A / 3 m 16 mm2
• PT-31 plasma torch / 6 m
• Air hose 3 m / 8x14
• Worm drive clamp - 1 pc.
• Cathode - 4 pcs.
• Nozzle - 4 pcs.
• Manual