Hand Tools

06-18-16 · Professional

• 160 mmLength
• 45 HRCWorking part hardness
• 0.2 kgNet weight

160 mm insulated diagonal cutting pliers rated to 1000 V for repair and installation work on live equipment. The sharply ground edges cut wire and thin rods without leaving burrs.

01-13-01 · Professional

• 0.31 lCylinder capacity
• 7 mmRod diameter
• 400x180x70 mmDimensions (unpackaged)

A professional sealant gun with two dispensing modes and 1300 N of thrust. The semi-open frame speeds up cartridge changes and the supplied needle clears dried sealant from the nozzle.

08-09-15 · Professional

A professional lever-action grease gun rated to 690 bar with a 520 cm³ barrel for 400 g cartridges or bulk fill: die-cast aluminum head, two valves, and a quick-release hose and rigid tube for hard-to-reach grease points.

06-19-10 · Professional

• 0.08-10 mm²Insulated terminal cross-section
• 0.08 mm²Min insulated terminal cross-section
• 10 mm²Max insulated terminal cross-section

Square-die crimping pliers for 0.08-10 mm² ferrules, with a self-adjusting die and a built-in pressure adjuster.

06-19-11 · Semi-professional

• 0.08-6 mm²Insulated terminal cross-section
• 0.08 mm²Min insulated terminal cross-section
• 6 mm²Max insulated terminal cross-section

Hex crimping pliers for 0.08-6 mm²: a single die covers 15 ferrule sizes and the ratchet mechanism delivers an even crimp.

06-18-18 · Professional

• 160 mmLength
• 0.26 kgNet weight

160 mm insulated combination pliers rated to 1000 V. They bend and cut wire, grip parts and hold workpieces, and the insulation makes them safe for electrical work on live equipment.

08-09-16 · Professional

A compact one-hand mini grease gun with a 150 cm³ barrel for spot lubrication in tight spaces: up to 300 bar, greases to NLGI 2, just 0.7 kg, with a quick-release tube and nozzle included.

01-13-02 · Professional

• 0.31 lCylinder capacity
• 8 mmRod diameter
• 340x180x60 mmDimensions (unpackaged)

A semi-open sealant gun with an impact-resistant body and up to 1300 N of thrust. Its light weight and shaped handle keep the hand comfortable through long sealing jobs.

06-18-19 · Professional

• 180 mmLength
• 0.27 kgNet weight

180 mm insulated combination pliers for hand fitting work. The high-quality insulation allows work at up to 1000 V, and the strong materials give the tool a long service life.

01-13-04 · Professional

• 0.31 lCylinder capacity
• 8 mmRod diameter
• 390x190x60 mmDimensions (unpackaged)

A professional sealant gun with auto-stop, which cuts the feed as soon as the trigger is released so the bead does not run on. The impact-resistant body and semi-open frame make cartridge changes quick.

08-09-17 · Professional

• 100 l/minAir consumption
• 1/4NPTFAir connector
• 290 atmWorking pressure

A professional air-operated grease gun for heavy grease: a 520 cm3 cylinder, working pressure up to 290 atm, a EURO quick-release coupling, and a hose and tube supplied.

06-19-12 · Professional

• 0.25-10 mm²Ferrule terminal cross-section
• 0.25 mm²Min ferrule terminal cross-section
• 10 mm²Max ferrule terminal cross-section

Square-die crimping pliers for 0.25-10 mm² with an adjusting screw and a ratchet: one self-adjusting die covers 17 ferrule sizes.

06-18-20 · Professional

• 160 mmLength
• 54 mmJaw length
• 0.15 kgNet weight

160 mm insulated needle nose pliers rated to 1000 V. The jaws taper towards the tips for fine work, and the insulated handles protect the user from electric shock.

08-09-20 · Household

• 310 atmWorking pressure
• 400 cm³Grease capacity
• 0.29 mHose length

A lever grease gun with a 400 cm3 cylinder and working pressure up to 310 atm: 400 g DIN 1284 cartridges, a quick-release coupling, a flexible hose and a steel tube.

01-13-10 · Professional

• 0.31 lCylinder capacity
• 7 mmRod diameter
• 335x210x50 mmDimensions (unpackaged)

A professional rotating sealant gun with a semi-open frame and drip protection for a clean bead. The tough ABS body stands up to daily use on site.

06-19-13 · Professional

• 0.08-16 mm²Insulated terminal cross-section
• 0.08-16 mm²Ferrule terminal cross-section
• 0.08 mm²Min ferrule terminal cross-section

Compact square-die crimping pliers for 0.08-16 mm² with an adjusting screw: the die covers 18 ferrule sizes and turns to match the cross-section.