Consumables & Accessories

Produk

Diamond cutting disc 160x12x1.8x22.2 mm
05-13-08Profesional
160×1.8 mmDimensions (unpackaged)
160 mmExternal diameter
12 mmDiameter hole
A 160x12x1.8x22.2 mm segmented diamond blade for accurate cuts in ceramic tile. It is made for wet cutting with coolant, which limits overheating and extends blade life.
Diamond chamfering disc 130x22.2 mm
05-13-09Profesional
130×130 mmDimensions (unpackaged)
130 mmExternal diameter
22.2 mmDiameter hole
A 130x22.2 mm continuous rim diamond blade for chamfering tile, porcelain stoneware and stone. Wet cutting with coolant keeps the edge clean and extends blade life.
Diamond edge-rounding disc 130x22.2 mm
05-13-10Profesional
130×2 mmDimensions (unpackaged)
130 mmExternal diameter
22.2 mmDiameter hole
A 130x22.2 mm diamond rounding blade, 2 mm thick. The balance of strength and flexibility suits high-precision edge work on hard materials.
Segmented diamond blade for concrete 350/25.4 mm
05-13-42Profesional
350 mmDiameter
14 mmDiameter
25.4/20 mmBore diameter
A 350/25.4 segmented diamond blade for concrete, for angle grinders, wall chasers and cut-off saws. It cuts reinforced concrete, brick, granite and rubble stone, wet or dry.
Segmented diamond blade for concrete 400/25.4 mm
05-13-43Profesional
400 mmDiameter
16 mmDiameter
25.4 mmBore diameter
A 400/25.4 segmented diamond blade for concrete with a 10 mm segment height, for floor saws, cut-off saws and machines. It cuts concrete, brick, sandstone and paving slabs, wet or dry.
Universal guide rail 900 mm
06-18-21Profesional
900 mmMax length
70 mmMax guide bar width
1140×80×35 mmDimensions (unpackaged)
A 900 mm aluminum guide rail with a 90 cm working length and impact-resistant plastic clamps for long straight cuts.
Universal guide rail 1250 mm
06-18-22Profesional
1250 mmMax length
70 mmMax guide bar width
1260×205×105 mmDimensions (unpackaged)
A 1250 mm aluminum guide rail with a 125 cm working length and impact-resistant plastic clamps for long straight cuts.
Diamond blade for stone 125 mm
11-01-027Profesional
125 mmDiameter
5 mmDiameter
22.2 mmBore diameter
A 125 mm hot-pressed diamond disc for cutting stone, concrete and brick with an angle grinder; the 12 mm segment height gives a long service life.
Diamond blade for stone 230 mm
11-01-028Profesional
230 mmDiameter
9 mmDiameter
22.2 mmBore diameter
A 230 mm laser-manufactured diamond disc with a 12 mm diamond layer for cutting stone, concrete and brick with an angle grinder.
Flap disc 125x22.2 P40
11-01-038Profesional
125 mmDiameter
1 pcsPack quantity
40Grit (FEPA P)
A 125x22.2 mm flap disc with P40 zirconia grain for dressing weld seams and working steel, cast iron and sheet metal.
Flap disc 125x22.2 P60
11-01-039Profesional
125 mmDiameter
1 pcsPack quantity
60Grit (FEPA P)
A 125x22.2 mm flap disc with P60 aluminum oxide grain for dressing weld seams and working steel, cast iron and sheet metal.
Flap disc 125x22.2 P80
11-01-040Profesional
125 mmDiameter
1 pcsPack quantity
80Grit (FEPA P)
A 125x22.2 mm flap disc with P80 aluminum oxide grain for dressing weld seams and working steel, cast iron and sheet metal.
Flap disc 125x22.2 P120
11-01-041Profesional
125 mmDiameter
1 pcsPack quantity
120Grit (FEPA P)
A 125x22.2 mm flap disc with P120 aluminum oxide grain for fine dressing of weld seams and working steel, cast iron and sheet metal.
Sanding belt 76x457 mm P40, 5 pcs
11-01-042Profesional
40Grit
40Grit
457 mmLength
A 76x457 mm P40 sanding belt on a strong cloth backing for belt sanders, five per pack.
Sanding belt 5 pcs. 76x457 mm P60 5pcs
11-01-043Profesional
A cloth-backed sanding belt for belt sanders: works wood, stone, metal and paint coatings, with a reinforced joint for maximum tear resistance and a long service life.
Sanding belt 76x456 mm P80, 5 pcs
11-01-044Profesional
80Grit
80Grit
456 mmLength
A 76x456 mm P80 sanding belt on a strong cloth backing for belt sanders, five per pack.

Menampilkan 16 dari 48 di halaman ini · total 224

1–48 of 224