TIG welding inverter TIG-200 04-08-04

The INFORCE TIG-200 argon-arc welding inverter suits work in vehicle workshops and use in industry and construction.

The current the machine delivers can be set anywhere from 15 to 200 amperes.

The front panel carries a bright digital ammeter display, the power switch, control knobs and mode buttons. With them you can set the start current for MMA and for TIG welding without pulse, the upper and lower welding current levels for pulse mode and the crater fill current, adjust the cleaning action and the pulse balance, set the post-flow time for shielding the weld with gas after welding, and set the required AC balance. Settings can also be stored in the machine's memory. The buttons on the panel let the operator switch to remote control and turn pulse mode on and off, which covers a wide range of specific welding tasks, from work on materials of different thicknesses to fine welding and decorative work; switch between TIG and MMA welding; and choose 2-stroke or 4-stroke torch operation. In 2-stroke mode the trigger has to be held down, while in 4-stroke mode a single press starts the process and another press stops it. The panel also carries a switch for welding on direct or alternating current.

• TIG torch
• 2 spare torch nozzles (ceramic)
• Ground cable
• Hose with quick coupler
• Manual