Consumables & Accessories

05-13-08 · احترافي

• 160×1.8 mmDimensions (unpackaged)
• 160 mmExternal diameter
• 12 mmDiameter hole

A 160x12x1.8x22.2 mm segmented diamond blade for accurate cuts in ceramic tile. It is made for wet cutting with coolant, which limits overheating and extends blade life.

05-13-09 · احترافي

• 130×130 mmDimensions (unpackaged)
• 130 mmExternal diameter
• 22.2 mmDiameter hole

A 130x22.2 mm continuous rim diamond blade for chamfering tile, porcelain stoneware and stone. Wet cutting with coolant keeps the edge clean and extends blade life.

05-13-10 · احترافي

• 130×2 mmDimensions (unpackaged)
• 130 mmExternal diameter
• 22.2 mmDiameter hole

A 130x22.2 mm diamond rounding blade, 2 mm thick. The balance of strength and flexibility suits high-precision edge work on hard materials.

05-13-42 · احترافي

• 350 mmDiameter
• 14 mmDiameter
• 25.4/20 mmBore diameter

A 350/25.4 segmented diamond blade for concrete, for angle grinders, wall chasers and cut-off saws. It cuts reinforced concrete, brick, granite and rubble stone, wet or dry.

05-13-43 · احترافي

• 400 mmDiameter
• 16 mmDiameter
• 25.4 mmBore diameter

A 400/25.4 segmented diamond blade for concrete with a 10 mm segment height, for floor saws, cut-off saws and machines. It cuts concrete, brick, sandstone and paving slabs, wet or dry.

06-18-21 · احترافي

• 900 mmMax length
• 70 mmMax guide bar width
• 1140×80×35 mmDimensions (unpackaged)

A 900 mm aluminum guide rail with a 90 cm working length and impact-resistant plastic clamps for long straight cuts.

06-18-22 · احترافي

• 1250 mmMax length
• 70 mmMax guide bar width
• 1260×205×105 mmDimensions (unpackaged)

A 1250 mm aluminum guide rail with a 125 cm working length and impact-resistant plastic clamps for long straight cuts.

11-01-027 · احترافي

• 125 mmDiameter
• 5 mmDiameter
• 22.2 mmBore diameter

A 125 mm hot-pressed diamond disc for cutting stone, concrete and brick with an angle grinder; the 12 mm segment height gives a long service life.

11-01-028 · احترافي

• 230 mmDiameter
• 9 mmDiameter
• 22.2 mmBore diameter

A 230 mm laser-manufactured diamond disc with a 12 mm diamond layer for cutting stone, concrete and brick with an angle grinder.

11-01-038 · احترافي

• 125 mmDiameter
• 1 pcsPack quantity
• 40Grit (FEPA P)

A 125x22.2 mm flap disc with P40 zirconia grain for dressing weld seams and working steel, cast iron and sheet metal.

11-01-039 · احترافي

• 125 mmDiameter
• 1 pcsPack quantity
• 60Grit (FEPA P)

A 125x22.2 mm flap disc with P60 aluminum oxide grain for dressing weld seams and working steel, cast iron and sheet metal.

11-01-040 · احترافي

• 125 mmDiameter
• 1 pcsPack quantity
• 80Grit (FEPA P)

A 125x22.2 mm flap disc with P80 aluminum oxide grain for dressing weld seams and working steel, cast iron and sheet metal.

11-01-041 · احترافي

• 125 mmDiameter
• 1 pcsPack quantity
• 120Grit (FEPA P)

A 125x22.2 mm flap disc with P120 aluminum oxide grain for fine dressing of weld seams and working steel, cast iron and sheet metal.

11-01-042 · احترافي

• 40Grit
• 40Grit
• 457 mmLength

A 76x457 mm P40 sanding belt on a strong cloth backing for belt sanders, five per pack.

11-01-043 · احترافي

A cloth-backed sanding belt for belt sanders: works wood, stone, metal and paint coatings, with a reinforced joint for maximum tear resistance and a long service life.

11-01-044 · احترافي

• 80Grit
• 80Grit
• 456 mmLength

A 76x456 mm P80 sanding belt on a strong cloth backing for belt sanders, five per pack.